All Products Besides Sandcar

Sold in pairs (Will do 2 doors) Sewn over ends Zinc Plated Brackets Comes with all mounting Hardware

Can-am maverick x3 lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleev...

Powdercoated Black Sits under the passenger rear seat Can be used with a single or dual battery set up Set up to use the True UTV-SBI-15 Battery I...

If you have an X3 you will encounter this problem if you haven’t already. We gottired of replacing the entire shroud and the fan just because the u...

The OEM Can Am X3 battery leaves a lot to be desired. This should be your first step in upgrading the batteries, and the power handling capacity of...

If  you are looking to add more lighting to you Pro R then we have an easy solution for you. These mounts / brackets bolt to the factory A pillar m...

This part extends the pad part of the pedal to the left so you can drive with 2 feet.Powdercoated black with grip tape on the foot side.This is a s...

Yamaha Yxz Nrg Seat Brackets – Fits BothNrg Frp-301 Universal Fiber Glass Bucket Racing SeatNrg Frp-300 Universal Fiber Glass Bucket Racing Seat

DO YOU HAVE A LIMP BED? Some Mfg's out there are building cages that don’t tie into the factory location on the X3. Not realizing that that support...

Can-Am Maverick X3 Chromoly Single Bar Rear Bumper (2017 - Present) Extreme desert style bumpers are completely constructed from 4130 chromoly tubi...

This mount fits a Full Throttle FT438 Battery and locates it in the factory location without any modifications. Battery NOT included.

Extreme bumpers are completely constructed from 4130 Chromoly tubing, that’s not only stronger but lighter than other steel typically used for bump...

This allows you to screw the bolts in from the front side for the lower BulkHead and Lower Arms. The plate is bolted in and stays in place while ho...

  If you have the factory drive belt shield on your car then you already know how noisy, flimsy it is and how much it moves. We designed this simpl...

Cycling Capacity 20 hour rate 28 Amp Hours Reserve Capacity @ 25 Amps 50 minutes @ 75 Amps 6 minutes Mechanic...

If you own a Can Am X3 then you are well aware of the heating issue. We designed this kit to get those temperatures down! This remote kit is adding...

Can Am X3 Bushing Kit Black Nylon Chromoly Pivot Tubes Sold as Set Replaces the factory prone to failure bushings

Can Am X3 Fender Flare KitThese mount to the factory fenders using the pre marked holes.Steel mounting brackets (Texture black to blend into fender...

Can Am X3 XRS Shock Tower Relocator This Shock Tower is not only a brace that ties the tower into the chassis but it moves the shocks out and up to...

Fits Inside Spare Tire Add more storage space Great for tools while on the go Universal Fitment for most Tire/Wheel Combos Made from Durable and W...

If you already have our Rear Bumper and are Running a Spare tire then thisis a must for you! Mounts on top of the tire and utilizes the Mac Strap t...

Can-Am Maverick X3 - Front Single Tube Replacement BumperExtreme Desert Style Bumpers – Are Completely Constructed From 4130Chromoly Tubing, That’s...

* These 3 plates go behind the rear bulk head and strengthen thefactory chassis. The also stay in place which makes it a lot easier tochange one or...

Powdercoated Black Sits under the passenger seat Can be used with the slider Can be used in the lower position Can be used with a single or dual b...

Can Am X3 Center Dash Takes place of the center uprights in the dash and is completely bolt in. Comes powder coated texture black with offset Color...

Can Am X3 Big Brake KitBiggest Rotors Available. 12″ Front and Rear!4 Piston Wilwood CalipersComplete bolt on kitResidual ValvesONLY works with 15″...

Extreme bumpers are completely constructed from 4130 Chromoly tubing, that’s not only stronger but lighter than other steel typically used for bump...

This "Pin Kit" is made to secure an AO Cooler pn# AOCRSNGHD in our Extreme Cooler Tray    NOTES: This Pin Kit is an attachment to our Cooler Tray f...

Check out our latest dual tube front bumper upgrade for the Polaris Pro R! Designed and built right here in the USA from 100% chromoly 1 - 3/4" tub...

Front CV Rock Guards Kit comes with 2 brackets, 2 Rubber Guards and all necessary hardware. Note: Please specify if you have Stock brakes or our Bi...

Can-am Maverick X3 Chromoly Weld On Gusset Kit

Extreme Performance designed iPad Mount. Mounts to the top of the glove box. Comes with hardware to mount to glove box lid. Sold Raw but we have a ...

NRG Innovation has developed another complement to our quick release steering kits. These units were designed specially so that an aftermarket stee...

AO Cooler pn# AOCRSNGHD The dimensions are 8.5″ Tall x 23″ Long x 15″ Wide It will hold 38 cans, plus 14 lbs. of ice. NOTES: This cooler fits in ou...

We make these LS Coil Covers 100% IN HOUSE, right down to the cap on the filler. We carry them in some colors but you can specify your colors and w...

Can Am X3 XRS Shock Tower Repair Kit This is for the person that did not install our Shock Tower kit already and had the stock tower break off. Thi...