Products

Radius Rod Support Plate. Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel Typically Used For Constr...

Extreme cage is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other steel typically used for roll cag...

Can-am Maverick R - Single Tube Front Bumper is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other s...

Can-am Maverick R lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleeve...

Extreme Lower Arm Bushing Kit 8 Nylon Bushing 4 Pivot Pins  

This rack can be used for a lot of different things. First off, it will work with the factory cage as it mounts into the bed. It can carry 2 Rotopa...

Our links are made from 6061 T6 Aluminum Billet Hex Material so you can get a wrench on it to adjust them. The Heim reducers are made from 17-4 Sta...

Can-Am Maverick R - Extreme Chromoly Rear Toe Link Double Shear Kit This goes on the middle Radius Rod on the outside at the hub and takes it from ...

Can-Am Maverick R - Extreme Transmission Speed Sensor Cover Aluminum 2 piece cover that protects the sensor from debris.  Stainless Hardware Sold R...

Extreme Upper Arm Bushing Kit 8 Nylon Bushing 4 Pivot Pins  

4130 Chromoly 1.25” Rods. Lower 2 Rods are Solid with Aluminum Insert Chromoly Hex Inserts so you can put a wrench on the rod while tightening hie...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly 3/4" Hiem Joints. Stainless 303 ...

Can-Am Maverick X3 – Side Exit Exhaust Kit Specs: 3″ Stainless pipe  Stainless steel muffler SS T-Band clamps SS Muffler and Chassis Mounts Rubber ...

Extreme Performance designed Amp Tray for the Can-Am Maverick X3 and X3 Max. Bolts on the firewall and power steering support part of the chassis....

Can Am X3 Fender Flare KitThese mount to the factory fenders using the pre marked holes.Steel mounting brackets (Texture black to blend into fender...

Extreme Performance designed iPad Mount. Mounts to the top of the glove box. Comes with hardware to mount to glove box lid. Sold Raw but we have a ...

*CAN AM X3 72" SMART LOCK FRONT AXLE (PASS OR DRIVER)  Through years of research and development Demon Powersports has developed a RACE-READY ULTIM...

Can Am X3 Demon Chromoly Lower Ball JointDemon Heavy Duty Ball Joints pn# PABJ-5006 HD* Made Up of 4340 Chromoly Steel Material* Greaseable and Ser...

Can Am X3 Demon Chromoly Upper Ball JointDemon Heavy Duty Ball Joints pn# PABJ-5008 HD* Made Up of 4340 Chromoly Steel Material* Greaseable and Ser...

Can Am X3 Eibach Spring Kit PRO-UTV – Stage 3 Performance Spring System (Set of 8 Springs)CAN-AMMaverick X3 X RS Turbo R Pn# E85-212-006-03-22

Aluminum full doors which fit the stock frames.  Fitment: Can Am 2 Seat X3, XRS, Turbo RR, XRC, XDS  30 minute install after doors are assembled.

Can Am X3 BOV KitThis Blow Off Valve comes complete with everything you will need to install.Machined from 6061-T6Hard Anodized BlackFully Adjustab...

Can-am Maverick X3 - Dual Tube Front Bumper is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other st...

Can Am X3 Chromoly Front Sub Frame KitIts no secret the front of these cars are really weak. No more doing acomplete frame swap for front end frame...

100% Tig welded - Chromoly Fabrication involved for install. Billet caps All hardware, tabs and spuds included. Sold Raw or Powder Coated (Select O...

Can Am X3 Chromoly Weld On Passenger Steering Rack Gusset Its a common problem for the factory steering rack mount to crack on a stock unit. We mad...

Extreme Desert Style Radius Rod Support Plates – Is Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel...

Extreme desert style cage is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other steel typically used...

If you are looking at this part you already know what happens to the factory mount. This Transmission Mount / Cross Member is made from Chromoly an...

Can-am Maverick X3 Chromoly Weld On Gusset Kit

Can-Am Maverick X3 – Engine Breather Kit Please specify if you have 2.5" or 3" Exhaust Tubing NOTE: Intended for RACE track use only. 

If you have an X3 you will encounter this problem if you haven’t already. We gottired of replacing the entire shroud and the fan just because the u...

Can Am X3 Bushing Kit Black Nylon Chromoly Pivot Tubes Sold as Set Replaces the factory prone to failure bushings

This allows you to screw the bolts in from the front side for the lower BulkHead and Lower Arms. The plate is bolted in and stays in place while ho...

This kit will keep your engine substantially cooler. We did our testing in the California summer in a sand wash with stock fan VS our shroud and fa...

Can-am maverick x3 lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleev...