Products

Can Am X3 BOV KitThis Blow Off Valve comes complete with everything you will need to install.Machined from 6061-T6Hard Anodized BlackFully Adjustab...

Can-am Maverick X3 - Dual Tube Front Bumper is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other st...

Can Am X3 Chromoly Front Sub Frame KitIts no secret the front of these cars are really weak. No more doing acomplete frame swap for front end frame...

100% Tig welded - Chromoly Fabrication involved for install. Billet caps All hardware, tabs and spuds included. Sold Raw or Powder Coated (Select O...

Can Am X3 Chromoly Weld On Passenger Steering Rack Gusset Its a common problem for the factory steering rack mount to crack on a stock unit. We mad...

Extreme Desert Style Radius Rod Support Plates – Is Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel...

Extreme desert style cage is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other steel typically used...

If you are looking at this part you already know what happens to the factory mount. This Transmission Mount / Cross Member is made from Chromoly an...

Can-am Maverick X3 Chromoly Weld On Gusset Kit

Can-Am Maverick X3 – Engine Breather Kit Please specify if you have 2.5" or 3" Exhaust Tubing NOTE: Intended for RACE track use only. 

If you have an X3 you will encounter this problem if you haven’t already. We gottired of replacing the entire shroud and the fan just because the u...

Can Am X3 Bushing Kit Black Nylon Chromoly Pivot Tubes Sold as Set Replaces the factory prone to failure bushings

This allows you to screw the bolts in from the front side for the lower BulkHead and Lower Arms. The plate is bolted in and stays in place while ho...

This kit will keep your engine substantially cooler. We did our testing in the California summer in a sand wash with stock fan VS our shroud and fa...

Can-am maverick x3 lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleev...

Can Am X3 Lowrider Cage * 100% Chromoly fabricated in California, USA * 1.75″ diameter .083 wall chromoly tubing * All tig welded * Integrated V-Br...

  This is a Aluminum Roof with Lexan inserts on both passenger and drivers side. These will make it easier to see as you approach a hill. A lot of ...

We have this strap custom made by Mac Straps to hold your spare on our rear bumper. Adjustable to fit different size tires. Also comes with eyelet ...

* These 3 plates go behind the rear bulk head and strengthen thefactory chassis. The also stay in place which makes it a lot easier tochange one or...

Can Am X3 Rear Shock Tower Brace KitMade to prevent cracking on the upper shock towers.If you see the powdercoating cracking on your upper rear sho...

If you own a Can Am X3 then you are well aware of the heating issue. We designed this kit to get those temperatures down! This remote kit is adding...

If you have an X3 you will encounter this problem if you haven’t already. We have not seen any repair product on the market so we decided to do it ...

If you have an X3 you will encounter this problem if you haven’t already. We have not seen any repair product on the market so we decided to do it ...

Extreme desert style modular roof rack – constructed from .090 6061-t6, slotted on all 4 sides to give you fully functional tie down capability. We...

X3 NRG SHIELD 2 SEAT SLIDER KIT Kit includes custom designed seat sliders for NRG SHIELD seats.

X3 NRG SHIELD SINGLE SEAT SLIDER KIT Kit includes custom designed seat sliders for (1) NRG SHIELD seat.

X3 SPARCO 2 SEAT SLIDER KIT Kit includes custom designed seat sliders for mounting SPARCO EVO-L seats in a Can-AM X3

Our links are made from 6061 T6 Aluminum Billet Hex Material so you can get a wrench on it to adjust them. The Heim reducers are made from 17-4 Sta...

Sold in pairs (Passenger and Drivers) Chromoly Tube Frame Powdercoated Black SFI Certified Nets Comes with all mounting Hardware NOTES: ONLY WORKS ...

If you own a Can Am X3 then you are well aware of the heating issue. We designed this system with CBR Performance Radiators to get those temperatur...

Can Am x3 Proz B.O.V. (Blow Off Valve) KITThis precision-made Universal UTV Turbo Diverter Valve by RZR Proz, AKA BlowOff Valve or BOV for short is...

Cam Am X3  Rear Knuckles  Ultimate Strength Added To Middle Radius Rod  Teflon Lined Spherical Bearings  72,000 lbs Of Force Here is the ultimate...

Can Am Knuckles The 7075 X3 Front Double Shear Capped Knuckle Set is the perfect upgrade for your Can Am X3. The 7075 material is 3x stronger than ...

The OEM Can Am X3 battery leaves a lot to be desired. This should be your first step in upgrading the batteries, and the power handling capacity of...

Laser cut steel frame with stainless mesh insert2 Stainless latchesStainless HardwarePowder-coated to match your car (Allow 3 days for powder coat)...

If you own a Can Am X3 then you know they left something to be desired in the power steering aspect of the car. We have the fix for that with our E...

The Strongest aftermarket Radius Rod Kit available for your Can Am Maverick X3 / X3 Max. Made for OEM 64" Width Suspension. 4130 chromoly 1.25” rod...

Extreme Performance Aluminum Canteens for (2017-2019) Can-Am X3 / X3 Max No more leaks! Our canteens are laser cut, hand crafted, TIG welded alumin...

Laser cut aluminum 3d windshield frame with auto style tempered glass.This windshield kit can be install on any of our X3 or X3 Max cages with no f...

Laser cut aluminum number plate kit. This number plates can be installed on any of our X3 or X3 Max cages with no fabrication. Sold raw at this pri...

This mount fits a Full Throttle FT438 Battery and locates it in the factory location without any modifications. Battery NOT included.

Can Am X3 Big Brake KitBiggest Rotors Available. 12″ Front and Rear!4 Piston Wilwood CalipersComplete bolt on kitResidual ValvesONLY works with 15″...

Can Am X3 Center Dash Takes place of the center uprights in the dash and is completely bolt in. Comes powder coated texture black with offset Color...

These arms fit the Can Am XRS 72” Models 4130 Chromoly Laser Cut Uses OEM Bal Joint and Grease Zerks

These arms fit the Can Am XRS 72″ Models Has the factory steering stops to prevent over extending the axles 4130 Chromoly 100% Tig Welded Comes w/ ...

Clutch cover quick release pin kit.Features:-Stainless steel cnc pins.-Stainless steel lanyards.-Change a belt much faster.-Easy installation.-Lany...

Sold in pairs (Will do 2 doors) Sewn over ends Zinc Plated Brackets Comes with all mounting Hardware

Can-Am Maverick X3 / X3 Max chromoly dual bar rear bumper with rear tie down tabs mounts.Extreme desert Style bumper – is completely constructed fr...