Extreme - Eco 2

This Replacement Lower A-Arm is for an Eco 3 Sandcar. However we can provide the correct shock spacers to fit an Eco 2 car as well. Sold Raw as see...

Eco 2 / Eco 3 Chromoly Spindle with King Kong Spindle Snout Sold Raw as seen in pictures. Sold each (ONE spindle) Does not include spindle nut Powe...

Eco 2 / Eco 3 Chromoly 2" Spindle  Sold Raw as seen in pictures. Sold each (ONE Spindle) Available in DRIVER or PASSENGER please specify which side...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers Brake Pads Spindle Nuts (Right and Left) NOTE: These do not come with the actual s...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers 3 Bolt  NOTE: These are not a direct bolt up to our older cars. You would need to ...

CBR Performance Radiator for your Extreme Performance Sandcar / Sandrail Fitment: Eco 2 Comes with fittings in factory locations Comes with ...

Spal 30102120 High Performance 16" Straight Blade Puller Radiator Fans 1918 CFM Specs: 10 Straight blades Puller Uses FRPT plug 1918 CFM at '0' ...

This is our in house manufactured Sequential Shifter. Made to work in any Sandcar, Sandrail or any offroad car equipped with a sequential transaxle.

EMPI Unpolished 4130 Chromoly Porsche 930 CV Joint Cage Fits: Empi PN 87-9469-B, 87-9470-B, 98-5094-B, 98-5099-B Sold each. 

EMPI Unpolished 4130 Chromoly Porsche 934 Or 935 CV Joint Cage Fits: Empi Pn 98-5097-B, 98-5098-B, 98-5096-B Sold each. 

EMPI 930 CV BOOT PN 86-9301 We use these boots on all of our Sandrails with 930 Axles.  PRICE IS FOR (1) BOOT

   Empi Metal Flange for 930 Over the C.V. Boot. 86-9313 Note: This flange will go over the bolts and use the bigger style boot. (boot or clamp not...

EMPI 930 BOOT FLANGE PN# 86-9302Steel Single Axle Boot Flange For 86-9301 CV Axle Boots 3/8″ Flange Lip.Sold each not in sets.

930 Universal CV Boot Clamp  Sold each  Note: We can combine shipping with other items.

 934 CV Bolt Kit - Comes with 24 Bolts 7/16 - 20 X 2 7/16" 12 Point    Note: We can combine shipping with other items.

  930 CV Bolt Kit - Comes with 24 Bolts 3/8" - 24 x 2 1/4" 12 Point    Note: We can combine shipping with other items.

Weldon A600-A (-10 inlet & outlet) Flow Through Fuel Pump -Extremely quiet-Smooth, precise fuel delivery-Extremely low current draw-Self Primin...

Weldon 1100-A Electric Fuel Pump 1100-A Fuel Injected Engines: 1400 HP @ 50 PSI (Naturally Aspirated) 1000 HP at 80 PSI (Boosted) Carburet...

AEM Electronics High-Flow External Electric Fuel Pumps 50-1005 UPC: 840879024086Fuel Pump Type: Electric externalFuel Pump Voltage: 12 VFlow Rate: ...

This pump was what we put int he earlier Eco 1, DTD 1, Eco 2, DTD 2 that ran a naturally aspirated LS engine (non turbo). It connects to your fuel ...

10AN inlet/ 8AN outlet Fuelab Filter with short (3 inch) 10 micron / Paper Element (Cellulose) Filter Features Compact design supports 200 GPH Gas...

10AN inlet/outlet Fuelab Filter with short (3 inch) 10 micron / Paper Element (Cellulose) Filter Features Compact design supports 200 GPH Gasoline...

-10 IN -10 OUT 100 MICRON STAINLESS FUEL FILTER "Standard" 100 Micron filter dimensions are 5.5” in length by 2.38” in diameter Over 60 sq. inche...

FUELAB Replacement Fuel Filter Element 71801This element will work in most of our sandrails with the Fuellab fuelfilter.

Black in color Two -10AN inlet ports and one -6AN return port Gasoline, diesel, methanol, and ethanol fuel compatible Billet Aluminum with anodize...

Black in color Two -6AN inlet ports and one -6AN return port Gasoline, diesel, methanol, and ethanol fuel compatible Billet Aluminum with anodize ...

Weldon A2040 Series Bypass Regulators A2040-281-A-120 Pressure Range (psi): 0-110Regulator Style: ReturnRegulator Location: InlineBoost/Vacuum Refe...

IMI-101NL Starter (Longer Snout) This unit is designed for a Volkswagen application using a type Itransmission. This is the high output version of ...

Cycling Capacity 20 hour rate 28 Amp Hours Reserve Capacity @ 25 Amps 50 minutes @ 75 Amps 6 minutes Mechanic...

Standard grade, 2 piece, 3/4 RH Male Rodend w/PTFE. Teflon lined. Right hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

Standard grade, 2 piece, 3/4 LH Male Rodend w/PTFE. Teflon lined. Left hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

FK JMX12T High Strength Alloy 3/4 RH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indiv...

FK JMXL12T High Strength Alloy 3/4 LH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indi...

FK JMX14T-770 High Strength Alloy RH Male Rodend w/PTFE. Fits a 7/8-14 threaded bung. Teflon lined so they don’t squeak. Right hand thread. Jam nut...