Extreme - Eco 3

Eco 2 / Eco 3 Chromoly Spindle with King Kong Spindle Snout Sold Raw as seen in pictures. Sold each (ONE spindle) Does not include spindle nut Powe...

Eco 2 / Eco 3 Chromoly 2" Spindle  Sold Raw as seen in pictures. Sold each (ONE Spindle) Available in DRIVER or PASSENGER please specify which side...

This Replacement Lower A-Arm is for an Eco 3 Sandcar. However we can provide the correct shock spacers to fit an Eco 2 car as well. Sold Raw as see...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers Brake Pads Spindle Nuts (Right and Left) NOTE: These do not come with the actual s...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers 3 Bolt  NOTE: These are not a direct bolt up to our older cars. You would need to ...

This is our in house manufactured Sequential Shifter. Made to work in and Sandcar, Sandrail or any offroad car equipped with a sequential transaxle.

Cycling Capacity 20 hour rate 28 Amp Hours Reserve Capacity @ 25 Amps 50 minutes @ 75 Amps 6 minutes Mechanic...

IMI-101NL Starter (Longer Snout) This unit is designed for a Volkswagen application using a type Itransmission. This is the high output version of ...

Spal 30102120 High Performance 16" Straight Blade Puller Radiator Fans 1918 CFM Specs: 10 Straight blades Puller Uses FRPT plug 1918 CFM at '0' ...

 934 CV Bolt Kit - Comes with 24 Bolts 7/16 - 20 12 Point    Note: We can combine shipping with other items.

Sand Tires Unlimited Razor Blaster Tire 10.75 x 15 NOTE: CALL FOR SHIPPING QUOTE

Sand Tires Unlimited Padla Trak Tires 16.50 x 15 No.2 NOTE: CALL FOR SHIPPING QUOTE

Standard grade, 2 piece, 3/4 RH Male Rodend w/PTFE. Teflon lined. Right hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

Standard grade, 2 piece, 3/4 LH Male Rodend w/PTFE. Teflon lined. Left hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

FK JMX12T High Strength Alloy 3/4 RH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indiv...

FK JMXL12T High Strength Alloy 3/4 LH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indi...

FK JMX14T-770 High Strength Alloy RH Male Rodend w/PTFE. Fits a 7/8-14 threaded bung. Teflon lined so they don’t squeak. Right hand thread. Jam nut...

FK Bearing SJNR12 RH 3/4 Steel Jam Nut Right hand thread. Rodends sold separately. Sold individually. Made in the USA. We use this exact part on ou...

FK Bearing SJNL12 LH 3/4 Steel Jam Nut Left hand thread. Rodends sold separately. Sold individually. Made in the USA. We use this exact part on our...

FK Bearing SJNR14 RH 7/8 Steel Jam Nut This is the Jam Nut you would use on a FK JMXT14T-770 RH Male Rodend. Right hand thread. Rodends sold separa...

Weldon 1100-A Electric Fuel Pump 1100-A Fuel Injected Engines: 1400 HP @ 50 PSI (Naturally Aspirated) 1000 HP at 80 PSI (Boosted) Carburet...

AEM Electronics High-Flow External Electric Fuel Pumps 50-1005 UPC: 840879024086Fuel Pump Type: Electric externalFuel Pump Voltage: 12 VFlow Rate: ...

10AN inlet/ 8AN outlet Fuelab Filter with short (3 inch) 10 micron / Paper Element (Cellulose) Filter Features Compact design supports 200 GPH Gas...

10AN inlet/outlet Fuelab Filter with short (3 inch) 10 micron / Paper Element (Cellulose) Filter Features Compact design supports 200 GPH Gasoline...

FUELAB Replacement Fuel Filter Element 71801This element will work in most of our sandrails with the Fuellab fuelfilter.

Black in color Two -10AN inlet ports and one -6AN return port Gasoline, diesel, methanol, and ethanol fuel compatible Billet Aluminum with anodize...

Black in color Two -6AN inlet ports and one -6AN return port Gasoline, diesel, methanol, and ethanol fuel compatible Billet Aluminum with anodize ...

Weldon A2040 Series Bypass Regulators A2040-281-A-120 Pressure Range (psi): 0-110Regulator Style: ReturnRegulator Location: InlineBoost/Vacuum Refe...

320mm diameter, and 25mm deep for the best possible fit in your racecar. LightweightReinforcedDouble riveted spokes for extra strength Premium Sued...

A compact version of NRG's Deep Dish Racing Series, for when that little bit of extra space helps... but style is still important! 330mm diameter, ...

320mm diameter, and 25mm deep for the best possible fit in your racecar.LightweightReinforcedDouble riveted spokes for extra strength Premium Leath...

The SRK-200-1BK generation 2.0 Quick Release features many options that conventional ball-locking quick release system do not. The Generation 2.0 i...

All of the qualities of our standard 2.0 Quick Release, but this time it's SFI approved, fireproof, and .5" shorter. Color: Matte Black / Titanium ...

These low profile strap clamps are the core of the Axia Alloys Modular Clamping System. These powerful Billet clamps snap around any size of roll c...

The best first aid kit on the planet! Equipped with high-performance life-saving supplies, so you’re prepared, confident, and protected. Made from...

Choose your color (Specify upon Order)Comes with a RCA for wiring but for a cleaner look we sell a base that stays on the cage.$12 for the std one ...

Choose your color (Specify upon Order)Comes with a RCA for wiring but for a cleaner look we sell a base that stays on the cage.$12 for the std one ...

Billet mount and fire extinguished supplied. Mix and match any of our clamp sizes to mount any size extinguisher to any size tube. The Axia Alloys ...

The TBO Off-Road Roll-Up Tool Go-Bag is constructed by an Off-Roader for Off-Roaders. We added 2 layers of durable 600 Denier PVC material with a f...

The 6 series LED 40 inch light bar is a beast of a light. This light bar will turn night to day. Typically used in forward-facing applications in a...

High performance LED lighting, designed with purpose; for durability! Heretic Studio's flagship LED light pairs a patented design with the highest ...

The Gravity® LED Pro6 Single is an off-road LED Light bar, using the patented Infinity Ring™ housing encases a Gravity LED G6 optical insert and mo...

The Gravity® LED Pro6 light bar is an LED off-road lighting system unlike any you've seen before. This high-performance light bar includes the pate...

We make these LS Coil Covers 100% IN HOUSE, right down to the cap on the filler. We carry them in some colors but you can specify your colors and w...

1 Sandcar or UTV Flag with Extreme Performance Logo 7/8" Pole Pocket 12" x 24" You pick the colors. NOTE: Allow 1 week to ship. Sand Car Buggy Sand...

2 Sandcar or UTV Flag with Extreme Performance Logo Right and Left Side's (For a car with dual whips) 7/8" Pole Pocket 12" x 24" You pick the color...

Crow 3" V-Harness with 3" Lap Belt and is made to go in the front seat of an Extreme Performance Sandrail.  Sold “Each” (will do one seat) Made in ...

Crow 2" V-Harness with 3" Lap Belt and is made to go in the rear seat of an Extreme Performance Sandrail.  Sold “Each” (will do one seat) Made in t...