Extreme Manufactured Parts

This "Pin Kit" is made to secure an AO Cooler pn# AOCRSNGHD in our Extreme Cooler Tray    NOTES: This Pin Kit is an attachment to our Cooler Tray f...

This mount fits a Full Throttle FT438 Battery and locates it in the factory location without any modifications. Notes: Battery NOT included. Shown ...

Can-am Maverick R - Dual Tube Front Bumper is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other ste...

Radius Rod Support Plate. Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel Typically Used For Constr...

Extreme cage is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other steel typically used for roll cag...

Can-am Maverick R - Single Tube Front Bumper is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other s...

Can-am Maverick R lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleeve...

Extreme Lower Arm Bushing Kit 8 Nylon Bushing 4 Pivot Pins  

This rack can be used for a lot of different things. First off, it will work with the factory cage as it mounts into the bed. It can carry 2 Rotopa...

Our links are made from 6061 T6 Aluminum Billet Hex Material so you can get a wrench on it to adjust them. The Heim reducers are made from 17-4 Sta...

Can-Am Maverick R - Extreme Transmission Speed Sensor Cover Aluminum 2 piece cover that protects the sensor from debris.  Stainless Hardware Sold R...

Extreme Upper Arm Bushing Kit 8 Nylon Bushing 4 Pivot Pins  

4130 Chromoly 1.25” Rods. Lower 2 Rods are Solid with Aluminum Insert Chromoly Hex Inserts so you can put a wrench on the rod while tightening hie...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly 3/4" Hiem Joints. Stainless 303 ...

Can-Am Maverick X3 – Side Exit Exhaust Kit Specs: 3″ Stainless pipe  Stainless steel muffler SS T-Band clamps SS Muffler and Chassis Mounts Rubber ...

Extreme Performance designed Amp Tray for the Can-Am Maverick X3 and X3 Max. Bolts on the firewall and power steering support part of the chassis....

Can Am X3 Fender Flare KitThese mount to the factory fenders using the pre marked holes.Steel mounting brackets (Texture black to blend into fender...

Extreme Performance designed iPad Mount. Mounts to the top of the glove box. Comes with hardware to mount to glove box lid. Sold Raw but we have a ...

Aluminum full doors which fit the stock frames.  Fitment: Can Am 2 Seat X3, XRS, Turbo RR, XRC, XDS  30 minute install after doors are assembled.

Can Am X3 BOV KitThis Blow Off Valve comes complete with everything you will need to install.Machined from 6061-T6Hard Anodized BlackFully Adjustab...

Can-am Maverick X3 - Dual Tube Front Bumper is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other st...

Can Am X3 Chromoly Front Sub Frame KitIts no secret the front of these cars are really weak. No more doing acomplete frame swap for front end frame...

100% Tig welded - Chromoly Fabrication involved for install. Billet caps All hardware, tabs and spuds included. Sold Raw or Powder Coated (Select O...

Can Am X3 Chromoly Weld On Passenger Steering Rack Gusset Its a common problem for the factory steering rack mount to crack on a stock unit. We mad...

Extreme Desert Style Radius Rod Support Plates – Is Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel...

Extreme desert style cage is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other steel typically used...

If you are looking at this part you already know what happens to the factory mount. This Transmission Mount / Cross Member is made from Chromoly an...

Can-am Maverick X3 Chromoly Weld On Gusset Kit

Can-Am Maverick X3 – Engine Breather Kit Please specify if you have 2.5" or 3" Exhaust Tubing NOTE: Intended for RACE track use only. 

If you have an X3 you will encounter this problem if you haven’t already. We gottired of replacing the entire shroud and the fan just because the u...

Can Am X3 Bushing Kit Black Nylon Chromoly Pivot Tubes Sold as Set Replaces the factory prone to failure bushings

This allows you to screw the bolts in from the front side for the lower BulkHead and Lower Arms. The plate is bolted in and stays in place while ho...

This kit will keep your engine substantially cooler. We did our testing in the California summer in a sand wash with stock fan VS our shroud and fa...

Can-am maverick x3 lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleev...

Can Am X3 Lowrider Cage * 100% Chromoly fabricated in California, USA * 1.75″ diameter .083 wall chromoly tubing * All tig welded * Integrated V-Br...

  This is a Aluminum Roof with Lexan inserts on both passenger and drivers side. These will make it easier to see as you approach a hill. A lot of ...

We have this strap custom made by Mac Straps to hold your spare on our rear bumper. Adjustable to fit different size tires. Also comes with eyelet ...

* These 3 plates go behind the rear bulk head and strengthen thefactory chassis. The also stay in place which makes it a lot easier tochange one or...

Can Am X3 Rear Shock Tower Brace KitMade to prevent cracking on the upper shock towers.If you see the powdercoating cracking on your upper rear sho...

If you own a Can Am X3 then you are well aware of the heating issue. We designed this kit to get those temperatures down! This remote kit is adding...

If you have an X3 you will encounter this problem if you haven’t already. We have not seen any repair product on the market so we decided to do it ...

If you have an X3 you will encounter this problem if you haven’t already. We have not seen any repair product on the market so we decided to do it ...

Extreme desert style modular roof rack – constructed from .090 6061-t6, slotted on all 4 sides to give you fully functional tie down capability. We...

X3 NRG SHIELD 2 SEAT SLIDER KIT Kit includes custom designed seat sliders for NRG SHIELD seats.

X3 NRG SHIELD SINGLE SEAT SLIDER KIT Kit includes custom designed seat sliders for (1) NRG SHIELD seat.

X3 SPARCO 2 SEAT SLIDER KIT Kit includes custom designed seat sliders for mounting SPARCO EVO-L seats in a Can-AM X3

Our links are made from 6061 T6 Aluminum Billet Hex Material so you can get a wrench on it to adjust them. The Heim reducers are made from 17-4 Sta...

Sold in pairs (Passenger and Drivers) Chromoly Tube Frame Powdercoated Black SFI Certified Nets Comes with all mounting Hardware NOTES: ONLY WORKS ...