Best Selling Products

Black Crow 3x2 4 Way Seat Belt Harness with Latch and Link Style Buckle.These Seat Belt Restraints Are Ideal for Recreational Use and Are Not Recom...

DragonFire has revolutionized mounting UTV harnesses in factory seats with the introduction of the UTV Harness Pass-Through Bezel for Polaris RZR m...

Eco 2 / Eco 3 Chromoly 2" Spindle  Sold Raw as seen in pictures. Sold each (ONE Spindle) Available in DRIVER or PASSENGER please specify which side...

This Replacement Lower A-Arm is for an Eco 3 Sandcar. However we can provide the correct shock spacers to fit an Eco 2 car as well. Sold Raw as see...

Eco 2 / Eco 3 Chromoly Spindle with King Kong Spindle Snout Sold Raw as seen in pictures. Sold each (ONE spindle) Does not include spindle nut Powe...

Empi 17-2861 Tie Down Strap with Ratchet Style Buckle. Includes Sewn in Optional Loop to Prevent Scratching. Quickly And Easily Secure Your Gear, A...

EMPI 930 CV BOOT PN 86-9301 We use these boots on all of our Sandrails with 930 Axles. (SOLD AS A SET OF 4)  

 Empi 930 CV Inner Cage Chromoly - 16-2615 Sold each.   

   Empi Metal Flange for 930 Over the C.V. Boot. 86-9313 Note: This flange will go over the bolts and use the bigger style boot. (boot or clamp not...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers 3 Bolt  NOTE: These are not a direct bolt up to our older cars. You would need to ...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers Brake Pads Spindle Nuts (Right and Left) NOTE: These do not come with the actual s...

New Style Extreme Performance Shirt.  Next Level Brand Shirts so they fit nice and dont shrink up after you wash them. Please specify what size you...

This is our in house manufactured Sequential Shifter. Made to work in and Sandcar, Sandrail or any offroad car equipped with a sequential transaxle.

Bolts up directly to Extreme Performance roll cages except for Kawaski KRX. Side Mirror Kit Sold as a pair. Bolts to LED bar Tabs. Sold Raw or Powd...

Standard grade, 2 piece, 3/4 RH Male Rodend w/PTFE. Teflon lined. Right hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

Standard grade, 2 piece, 3/4 LH Male Rodend w/PTFE. Teflon lined. Left hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

FK JMX12T High Strength Alloy 3/4 RH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indiv...

FK JMX14T-770 High Strength Alloy RH Male Rodend w/PTFE. Fits a 7/8-14 threaded bung. Teflon lined so they don’t squeak. Right hand thread. Jam nut...

FK JMXL12T High Strength Alloy 3/4 LH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indi...

FK Bearing SJNL12 LH 3/4 Steel Jam Nut Left hand thread. Rodends sold separately. Sold individually. Made in the USA. We use this exact part on our...

FK Bearing SJNR12 RH 3/4 Steel Jam Nut Right hand thread. Rodends sold separately. Sold individually. Made in the USA. We use this exact part on ou...

AEM Electronics High-Flow External Electric Fuel Pumps 50-1005 UPC: 840879024086Fuel Pump Type: Electric externalFuel Pump Voltage: 12 VFlow Rate: ...

FK Bearing SJNR14 RH 7/8 Steel Jam Nut This is the Jam Nut you would use on a FK JMXT14T-770 RH Male Rodend. Right hand thread. Rodends sold separa...

10AN inlet/ 8AN outlet Fuelab Filter with short (3 inch) 10 micron / Paper Element (Cellulose) Filter Features Compact design supports 200 GPH Gas...

10AN inlet/outlet Fuelab Filter with short (3 inch) 10 micron / Paper Element (Cellulose) Filter Features Compact design supports 200 GPH Gasoline...

Black in color Two -10AN inlet ports and one -6AN return port Gasoline, diesel, methanol, and ethanol fuel compatible Billet Aluminum with anodize...

Black in color Two -6AN inlet ports and one -6AN return port Gasoline, diesel, methanol, and ethanol fuel compatible Billet Aluminum with anodize ...

FUELAB Replacement Fuel Filter Element 71801This element will work in most of our sandrails with the Fuellab fuelfilter.

Cycling Capacity 20 hour rate 20 Amp Hours Reserve Capacity @ 25 Amps 28 minutes @ 75 Amps 0 minutes Mechanic...

Cycling Capacity 20 hour rate 28 Amp Hours Reserve Capacity @ 25 Amps 50 minutes @ 75 Amps 6 minutes Mechanic...

Cycling Capacity 20 hour rate 35 Amp Hours Reserve Capacity @ 25 Amps 60 minutes @ 75 Amps 11 minutes Mechani...

Cycling Capacity 20 hour rate 44 Amp Hours Reserve Capacity @ 25 Amps 80 minutes @ 75 Amps 14 minutes Mechani...

The 6 series LED 10 inch light bar is the most versatile light in our lineup. Typically, this light bar is used in forward-facing applications in t...

The 6 series LED 10 inch light bar is the most versatile light in our lineup. Typically, this light bar is used in forward-facing applications in t...

The 6 series LED 40 inch light bar is a beast of a light. This light bar will turn night to day. Typically used in forward-facing applications in a...

The 6 series LED 50 inch light bar is rivaled by none and known as the king of all light bars. Typically used in forward-facing applications in aft...

The Heretic Can Am Maverick X3 10 Inch Shock Tower Light Bar takes our staple 10-inch LED Light Bar and utilizes our in-house designed mounts, cust...

High performance LED lighting, designed with purpose; for durability! Heretic Studio's flagship LED light pairs a patented design with the highest ...

IMI-101N Starter This unit is designed for a Volkswagen application using a type Itransmission. This is the high output version of the IMI-101. Thi...

IMI-101NL Starter (Longer Snout) This unit is designed for a Volkswagen application using a type Itransmission. This is the high output version of ...

  IMI Performance 104 1.6HP 12V High Torque Starter For 6 Rib 091 Or 094 Bus For 12V Flywheel This starter is self supporting. In a VW transmission...

*Mounts in center of the dash and is completelybolt in * Comes powder coated texture black with offset Color Overlay * Comes with all necessary Har...

Extreme Desert Style Bumper – Is Completely Constructed From 4130 Chromoly Tubing, That’s Not Only Stronger, But Lighter Than Other Steel Typically...

Extreme desert style cage is completely constructed from 4130 chromolytubing, that’s not only stronger but lighter than other steel typically usedf...

Kawasaki Krx 1000 Dual Bar Front BumperExtreme Desert Style Bumpers – Are Completely Constructed From 4130Chromoly Tubing, That’s Not Only Stronger...

Laser cut steel frame with stainless mesh insert2 Stainless latchesStainless HardwarePowder-coated to match your car (Allow 3 days for powder coat)...

Kawasaki KRX 1000 Lower Valance *WILL ONLY WORK WITH OUR CAGE* Comes with all mounting hardware No fabrication needed. Completely bolt on. Sold Raw...

Kawasaki KRX 1000 Nerf Bars Chromoly 100% Tig welded Fabrication involved for install. Billet caps All hardware, tabs and spuds included