DR1 SANDCAR

Dimensions:                 Wheel Base - 148"                                           Front Width - 87" @ Ride Height                            ...

DR1 CHASSIS PACKAGE 2 BASE CHASSIS CHROMOLY CHASSIS FULLY TIG WELDED                                                                               ...

If you have seen custom designed Marine flooring, then you know what you are looking at. This is the same concept only this is for your Sandrail fl...

This is our in house manufactured Sequential Shifter. Made to work in any Sandcar, Sandrail or any offroad car equipped with a sequential transaxle.

We make these LS Coil Covers 100% IN HOUSE, right down to the cap on the filler. We carry them in some colors but you can specify your colors and w...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers 3 Bolt  NOTE: These are not a direct bolt up to our older cars. You would need to ...

Extreme 934 Micro Stub Kit 11" Rotors  4 Piston Wilwood Calipers Brake Pads Spindle Nuts (Right and Left) NOTE: These do not come with the actual s...

EMPI Unpolished 4130 Chromoly Porsche 934 Or 935 CV Joint Cage Fits: Empi Pn 98-5097-B, 98-5098-B, 98-5096-B Sold each. 

Cycling Capacity 20 hour rate 28 Amp Hours Reserve Capacity @ 25 Amps 50 minutes @ 75 Amps 6 minutes Mechanic...

AEM Electronics High-Flow External Electric Fuel Pumps 50-1005 UPC: 840879024086Fuel Pump Type: Electric externalFuel Pump Voltage: 12 VFlow Rate: ...

-10 IN -10 OUT 100 MICRON STAINLESS FUEL FILTER "Standard" 100 Micron filter dimensions are 5.5” in length by 2.38” in diameter Over 60 sq. inche...

Weldon Billet Fuel FiltersManufacturer’s Part Number: WEQ1010CLNFuel Filter Style: InlineInlet Quantity: OneInlet Size: -10 AN O-ringInlet Attachme...

FUELAB Replacement Fuel Filter Element 71801This element will work in most of our sandrails with the Fuellab fuelfilter.

Weldon A2040 Series Bypass Regulators A2040-281-A-120 Pressure Range (psi): 0-110Regulator Style: ReturnRegulator Location: InlineBoost/Vacuum Refe...

Standard grade, 2 piece, 3/4 RH Male Rodend w/PTFE. Teflon lined. Right hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

Standard grade, 2 piece, 3/4 LH Male Rodend w/PTFE. Teflon lined. Left hand thread. Jam nuts sold separately. Sold individually. Made in the USA.

FK JMX12T High Strength Alloy 3/4 RH Male Rodend w/PTFE. Teflon lined so they don’t squeak. Right hand thread. Jam nuts sold separately. Sold indiv...

FK JMX14T-770 High Strength Alloy RH Male Rodend w/PTFE. Fits a 7/8-14 threaded bung. Teflon lined so they don’t squeak. Right hand thread. Jam nut...

FK Bearing SJNR12 RH 3/4 Steel Jam Nut Right hand thread. Rodend sold separately. Sold individually. Made in the USA. We use this exact part on our...

FK Bearing SJNL12 LH 3/4 Steel Jam Nut Left hand thread. Rodend sold separately. Sold individually. Made in the USA. We use this exact part on our ...

FK Bearing SJNR14 RH 7/8 Steel Jam Nut This is the Jam Nut you would use on a FK JMXT14T-770 RH Male Rodend. Right hand thread. Rodend sold separat...

Welcome to the most advanced accessory switcher available -12 Fully Programmable Outputs Controlled by an LCD Touch-Button Display -180 Amp Load Ca...

This is a single wire whip base that grounds itself on your vehicle's chassis / cage.  Screw in style base Black in color  

4' LED Whip  Threaded style aluminum adapter Meant to be used with a HD Base we also sell. Choose your color (Specify upon Order) RED, BLUE, GREEN,...